The Stokke® Table Top is not scratch-proof. Its surface can be damaged with a hard or sharp object and scratches may appear on the surface after some time. This is considered a result of normal wear and tear of the product.

In the box, the Stokke® Tripp Trapp® Baby Set™ (6-36 months) measures 43 x 19 x 22 cm. and weighs 0.75 kg.

The dimensions of the product itself are as follows:

Safety rail: width, from end to end, 40 cm / depth, from front to back, 20 cm / height, top of the rail to the seating plate, 20 cm.
Back piece: width 35 cm / height 22.5 cm.

In the box, the Stokke® Tripp Trapp® Newborn Set™ (0-6 months) measures 51 x 20 x 36 cm. and weighs 2.5 kg.

The dimensions of the product itself are as follows:

Outer shell: length 50.5 cm / width 35 cm / height 19.5 cm.
Inner seat: length ""head to toe"" 41 cm / max. depth (at center) 16 cm

The EU/UK Stokke® Tripp Trapp® Newborn Set is compatible with US Tripp Trapp® chairs.

However, it has not been certified for sale in the US due to differing standards and test methods from those in Europe. This implies that although the components between the Us and EU versions are interchangeable, they have not been approved by the United States Government.

The Stokke® Table Top is only meant to be used on level, smooth and clean surfaces, otherwise the suction cups cannot create a vacuum. If you suspect the suction cups may not be functioning adequately, please test the product on various surfaces.

The Stokke® Table Top suction cups are packed in pairs and these are stuck together in the packaging. Please check whether you have two packages of two suction cups.

If this is not the case, please contact our Customer Service helpdesk for your respective country via the following link and provide your full address details: http://www.stokke.com/global/contact-us

The Stokke® Table Top tray is made of PETG (Polyethylene Terephthalate Glycol-modified) and free from harmful substances such as phthalates and bisphenol. It is perfectly safe to use with food.

The material from which the Table Top™ is manufactured, is not dishwasher-safe.

Therefore we recommend washing it by hand. The Table Top™ and suction cups can be washed with warm water and dishwasher detergent.

If you find that the leg space of the current, plastic Stokke® Tripp Trapp® Baby Set™ is too tight for your child, please make sure the Tripp Trapp® chair itself is adjusted correctly (with the seat plate installed according to the instructions in the Tripp Trapp® user guide) and the Baby Set™ fitted according to instructions in the Baby Set™ user guide. Both user guides for the Tripp Trapp® chair as well as the Baby Set™ can be downloaded from:

http://www.stokke.com/highchair/tripp-trapp-userguides-and-brochures.aspx

On a general note, the new Stokke® Tripp Trapp® Baby Set™ has undergone rigorous testing and had been in use in the US, to high customer satisfaction, for several years before its introduction in Europe in 2011. It was designed to meet revised international safety standards for high chairs (used between 6 and 36 months of age) and to fit the average child. Of course, it may well happen in some cases that a child grows faster than the norm and outgrows the Baby Set™ before it reaches the maximum age advertised.

Stokke® Tray is compatible with Stokke® Baby set version “V2” or “V3”.

If there is a mark “V2” or “V3” on the inner side of the Baby set rail (next to the sides attachment), then the Stokke® Tray will be compatible with the Baby set. If there is no mark on the rail the Baby set is version V1 and the Stokke® Tray will unfortunately not fit.

The tamper-proof buckle has an effective design that is intended to protect your little one securely on the Tripp Trapp® chair. We encourage you to spend 10 minutes to familiarize yourself with the product and properly adjust it prior to first use.

Please remember that since your child is constantly growing you need to readjust the Stokke® Harness on a regular basis.

Most important: never leave your child unattended.

The Tray should not be loaded with more than 5 kg/11 lbs.

Please see this film showing how to assemble the Stokke Harness. Click here.

Stokke® Harness² is manufactured in China.

The Stokke® Harness² is crafted using Polypropylene.

You can use the Stokke® Harness² for your baby until they reach 15kg, which is approximately 3 years old.  

To maintain the Stokke® Harness², wipe it with a cloth after each use to promptly remove any food or spills and prevent potential staining.  
Additionally, the product is washing machine safe up to 40°C/104°F. 

There are a few differences between the original Stokke® Harness and the new Stokke® Harness².  

The Stokke® Harness² feels softer and provides a more comfortable experience. 

While the original harness was easy to buckle and unbuckle, Stokke® Harness² is designed to be quicker and more intuitive. It has a quick-release button which allows you to release the harness in a matter of seconds.  

Additionally, it's more straight forward to attach to the Tripp Trapp® Baby Set² for added convenience. 

No. The new Stokke® Harness² released in April 2024 is only compatible with the Tripp Trapp® Baby Set², also released in April 2024. 

However, the original Tripp Trapp® Baby Set can still be used with the previous Stokke® Harness, and the latter will remain available as a spare part for some time.

The harness featuring the round beige buckle (with the Stokke logo) is only compatible with Tripp Trapp® Baby Set2 units, which were produced after April 2024.  

The harness with the white buckle (without the Stokke logo) is suitable to use with all Tripp Trapp® Baby Sets. 

Begin by attaching the back straps of the Stokke® Harness² to the back part of the Tripp Trapp® Baby Set² by threading the ends through the sparings on the back of the Baby Set. You can then clip the Baby Set onto the backrest of the Tripp Trapp® Chair. 

Next, take the ends of the crotch strap of the harness and thread it through the sparing on the front rail of the Baby Set. You can then securely click the front rail into the Tripp Trapp® chair onto the seat plate. 

For a more detailed explanation, along with visual diagrams, refer to the user guide available on the Stokke® Harness² page on Stokke.com. 

Before using the Stokke Harness² for the first time, we encourage you to review the user guide to familiarize yourself with the product and make proper adjustments. Keep in mind that as your child is growing, regular readjustments of the Stokke® Harness² are necessary.  

Most importantly, never leave your child unattended. 

No, it is not safe to use the harness without the Baby Set. The Stokke® Harness² needs to be attached to the Tripp Trapp® Baby Set² for the safest use. 

The harness should always be used in conjunction with the Tripp Trapp® Baby Set², which has a weight limit of 15 kg (roughly 3 years at most). This serves as the limit for the harness as well. This means that you cannot use the Stokke® Harness² with older children. 

The Tripp Trapp® Baby Cushion is not compatible with the Stokke® Harness². Please refrain from using them together. 

The Tripp Trapp® Baby Set² is manufactured in the Netherlands. 

The seat plate should be placed in groove 1, and the recommended position for the footplate is groove 5. However, you should adjust the footplate according to the child's size. 

All Stokke Trays for Tripp Trapp® fit the new Tripp Trapp® Baby Set².   

We recommend cleaning with warm water and mild soap immediately after use to remove food and spills and prevent potential staining. The plastic components of the Baby Set are dishwasher safe. 

If you notice the leg space of the plastic Tripp Trapp® Baby Set² is too tight for your child, ensure the Tripp Trapp® chair is correctly adjusted (with the seat plate installed per the Tripp Trapp® user guide) and the Baby Set is fitted according to the instructions in the Baby Set user guide.

Both user guides can be found on stokke.com. 

In general, the Tripp Trapp® Baby Set² adheres to stringent testing and meets international safety standards for high chairs (for use between 6 and 36 months). It is designed to accommodate the average child. Stokke complies with safety regulations which set a maximum size for allowed leg openings. 

Of course, it may well happen in some cases that a child grows faster than the norm and outgrows the Baby Set before it reaches the maximum age advertised. 

The Stokke® Harness should be used with the Tripp Trapp® Baby Set.  The CPSC safety standard for highchairs requires a three-point restrain system. When the child can climb up and down the chair independently, usually around the age of 3, the Baby Set and harness should be removed from the chair. At that time, you might also adjust the seat and foot plates of the chair to better fit ergonomically the size of the child.