Stokke® JetKids™ Cloudsleeper™

The CloudSleeper™ is the compact and lightweight children's travel bed from 3 years and above. It is a travel bed for home and away, an inflatable bed with no loose parts and an integrated pump.

CloudSleeper™ includes an inflatable base, a removable air mesh cover with water repellent fabric on the bottom side, and a custom-made packing cube.

The CloudSleeper™ is designed for children two years and up to approximately 10 years (150cm / 4′ 11″).

There are several updates for the new CloudSleeper™ launched in 2025. We have removed small parts in the design so that the travel bed can be used by toddlers from 2 years and above. The 3D air mesh cover now comes with two beautiful prints, Anmal family and Star Maze. The colorful print makes it possible for parents and toddler to have a great bed time interaction.

The CloudSleeper™ weights only 1.4kgs/3lbs.

The CloudSleeper™ is tested for a max weight of 150lbs/68kg.

The CloudSleeper™ when inflated is 150 x 75 x 17 cm / 59 x 29.5 x 6,7 inches.

When you pack the CloudSleeper™ down in the packing cube and fully compress it, it is 38 x 28 x 10 cm / 15 x 11 x 4 inches.

The packing cube of the CloudSleeper™ is a design that allows you to compress the CloudSleeper™ even more for packing and ease of transport. It is designed with double layered zipper. By closing both layers, you can push more air out of the CloudSleeper™ and compress it to the smallest size. With the new launch in 2025, the packig cube also comes with beautiful prints with random cuts from the main pattern of the mesh cover!

Thanks to its compact and lightweight design, the CloudSleeper™ is the perfect bed for indoor and outdoor activities at home and away, such as sleepovers, camping, famliy reunions, hotels and more.

The CloudSleeper™ has a removable and machine-washable cover, made of water repellent material on the bottom side and comfortable air mesh on top. These materials allow you to use the CloudSleeper™ on both indoor and outdoor adventures. Please make sure you place the CloudSleeper™ on a stable and smooth surface when using it outdoors.

The inflatable base is made of light and durable TPU-coated nylon, similar to what is used on high-end hiking mattresses, for example. The removable and machine washable cover is made of polyester air mesh on the top, combined with water repellent polyester on the bottom side.

You can wash the cover in the washing machine at a recommended 30 degrees Celsius cycle. We recommend 30 degrees Celsius (cold wash). However, 40 degrees Celsius (warm wash) is also an option. To dry, we recommend putting the cover on the base, inflate it, and let dry while inflated. To clean the inflatable base, wipe off any dirt or stains using a wet cloth.

After your receive the product, the TPU base and the air mesh cover are assembled already.  Unfold them, unzip the mesh cover, open the valve cap on the pump and close the valve cap in the upper right hand side on the bottom.   Use both hands or foot to push the integrated pump to pump the mattress up.  You can also find a clear how-to videos on Stokke youtube channel : https://www.youtube.com/@stokkebaby/featured.

For the first time, it might take up to 3 minutes to infalte it.  As you get used to the motion, it will take around 1 minute for the inflation.   All in all, removing CloudSleeper™ form the compression cube, unfolding, and inflating it would typically take less than 3 minutes.

No, the CloudSleeper™ comes with an integrated pump. You will not need any additional or external tools to inflate it. Inflate by pushing with both hands down on the pump area or by using your foot. When inflating, remember to have the valve cap open on the pump and close the deflation valve at the opposite end.

After usage, simply open the deflation valve cap at the opposite end of the pump and roll up the mattress firmly one time to deplete all air. Then unroll and fold along the numbered and dotted lines printing on the back of the cover.  Finally, push the mattress back into the packing cube and close the pakcing cube with the zipper. If needed, you may also use the additional zipper to compress the CloudSleeper™ further.

It takes around 2 minutes to pack down.

In normal circumstances, the CloudSleeper™ stays inflated for weeks and should not leak at all. However, as air expands with increasing temperature and contracts when cooled, you might experience some variation in firmness when, for example, moving the CloudSleeper™ from a hot to a cold area and vice versa. You can adjust the firmness at any time by giving it a few pushes on the pump area or releasing some air.

The dotted lines are there to make it easy and quick for you to pack down the CloudSleeper™ into the packing cube.   After use, open the deflation valve and roll up the CloudSleeper™ first, starrting from the pump side.  Then unroll it, and fold it along the dotted lines, starting with lines number 1 and 2.

CloudSleeper™ comes with a global warranty of 2 years from the day of purchase.

Yes! The CloudSleeper™ fits perfectly inside the BedBox and still leaves some space available for some of your child’s personal belongings.